Dual Manufacturing 8" ASTM Test Sieve, #60 (0.250mm), Brass Frame / Stainless Steel Mesh, 1" Deep

#60 (0.250 mm) ASTM laboratory test sieve — 8 in × 1 in, brass frame

This Dual Manufacturing ASTM test sieve provides a nominal #60 (0.250 mm) opening in an 8 in diameter, 1 in deep frame. The sieve uses stainless steel mesh with a brass frame for laboratory particle-size analysis and standardized sieving procedures.

Typical applications and selection: The 0.250 mm opening is well suited to classification of fine powders, granular materials and fine sand-size fractions in laboratory quality-control and particle-size work. The stainless-steel mesh provides a corrosion-resistant screening surface, while the brass frame is a practical choice for routine dry laboratory sieving. The 1-inch depth is useful when stack height is limited, when many sieve sizes are used in one test, or when the available sample volume is relatively small. The final sieve designation and opening should always follow the applicable test method or product specification.

Dual Manufacturing USA Standard sieves are produced as ASTM E11 compliant sieves. Each sieve has an individualized etched serial number and is supplied with a manufacturer certificate. Inspection certification is available as an option, and recertification services are also available for used sieves.